Industrial Injection 2nd Gen Dodge Cummins Compound Turbo User Manual
Page 18
23.
Install battery box using stock bolt in the fender and using the stock nut. Using the remaining heat shield
put on the face of the batter box. Connect and route ground and positive battery cables as needed away
from turbo.
Note: Use this stud and nut for battery tray
24.
Install battery using stock battery bracket along with new battery bracket and bolts and using stock clips
off stock batter tray and secure battery.
HEA
T SHIELD ON FRONT
OF
TRA
Y
25.
Add coolant and check for oil at the turbo feed line on new turbo when tuck is first started. Check for
leaks