Losi LOSB9810 - Manual (Page 7)

Damaged batteries must be kept at even more ambient temperatures. High temperatures may cause fire even
with undamaged batteries.
Battery Disposal
Li-Po batteries require special handling for safe disposal. The following are basic instructions for safe disposal.
For more detailed safety, disposal and recycling information please go to: www.rbrc.org or www.earth911.org.
Basic Disposal Instructions
Before discarding any Li-Po battery it must be rendered safe. The following steps must be taken to avoid damage or
injury to yourself, your property and anyone who comes in contact with the battery.
If the battery is undamaged but no longer useful:
1. Discharge the battery to a maximum of 2.5V using a slow, safe discharge method.
2. Leave battery uncharged and retest after at least 24 hours. Many batteries experience “rebound” and may have
more than 2.5V after 24 hours. If the battery is over 2.5V, repeat the procedure until the battery is 2.5V or less.
3. Insulate each wire lead with electrical tape or other appropriate material.
4. Assure that wire leads cannot touch each other by taping them to opposite sides of the battery.
5. Place battery in a sealed plastic bag and place plastic bag in a vented, fire-safe container.
6. Use fire-safe container to deliver battery to a recycling center authorized for Lithium Polymer batteries. Please
note that not all battery-recycling services include Li-Po’s. If no Li-Po recycling facility is available in your area,
contact your state or local Hazmat agencies for instructions.
7. If the battery or wiring is damaged please contact your state or local Hazmat facilities for instructions. Batteries
must be rendered safe before being transported or recycled. Do NOT transport or ship batteries which have
more than 2.5V charge OR that show signs of damage without following the instructions given by authorities.
Damaged batteries should be rendered as safe as possible and stored in a vented fireproof container until
recycled.