Losi LOSB9810 - Manual (Page 3)

4. Please note that you may want to insert a piece of soft foam material on
either side or at the end of the battery to prevent the battery from moving
around in the transmitter.
Use some soft foam such as Radio with Battery Use a hobby knife to
Losi “Foam Battery Pads” cut the battery foam
Part Number – LOSA4015 - One piece in half
- Cut only the
end off the second
Looking at the above picture, there is one piece on the side of the battery, the
large end is put at the end of the battery, and the last piece is placed on top
of the battery and will be between the cover and battery.
5. Your LOSB9810 LiPo transmitter battery pack is installed and ready for use.
Specifications:
- Output Voltage: 11.1V 3-cell LiPo
- Capacity: 2400mAh
- Output Connector: 3-pin J-type (Male)
- Balance Connector: 4-pin