Losi LOSB0207 User Manual
Page 5
5
Safety Precautions
This is a sophisticated radio controlled model that must be operated with caution and common sense. Failure to
operate your Mini HIGHroller in a safe and responsible manner could result in damage to the model and property. The
Mini HIGHroller is not intended for use by children without direct adult supervision. Losi and Horizon Hobby shall not
be liable for any loss or damages, whether direct, indirect, special, incidental, or consequential, arising from the use,
misuse, or abuse of this product or any product required to operate it.
•
Always keep some distance in all directions around your model as a safety margin to avoid collisions.
•
Always operate your model in an open area away from cars, traffic and people.
•
Avoid running your model in the street where damage can occur.
•
Never run your Mini HIGHroller with low transmitter batteries.
•
Carefully follow the directions and warnings for this and any optional support equipment.
•
Keep all chemicals, small parts and anything electrical out of the reach of children.
Suggested Tools
•
Soft bristle brush for cleaning
•
5.5mm nut driver for the wheel nuts
•
#0 or #1 Phillips screwdriver
•
LOSA99100 .050-inch Allen Wrench
Note: Use only Losi tools or other high-quality tools. Use of inexpensive tools can
cause damage to the small screws and parts used on this type of model.
The Radio System
The following is an overview of the various functions and adjustments found on your Losi Mini HIGHroller radio
system.
The Receiver
1.
Throttle Port: Where the Electronic Speed Control (ESC) plugs in.
2.
Steering Port: Where the steering servo plugs in.
3.
Bind Port: Used to “bind” the receiver to the transmitter.
4.
Indicator Light: Shows that a frequency/channel is being received.
The Electronic Speed Controller (ESC)
5.
On/Off Switch: Powers the receiver and ESC.
6.
Setup Button and Indicator Light: Used for re-setting the ESC.
7.
Battery Lead: Connects to the battery pack for power.
8.
Motor Lead: Connects to the wire leads from the motor.
1
2
3
4
6
8
5
7