Step 1 step 2, Step 3 fig 1 fig 2 fig 3 – Losi LOSB0207 User Manual

Page 3

STEP 1

STEP 2

Step 3.1

Once the battery is charged, remove the body clip from

the front battery hold-down and lift the battery

strap (fig. 1).

Step 3.2

Install the charged battery pack into the chassis as

shown (fig. 2). Ensure the battery is laying flat on

the chassis.

Step 3.3

Reinstall the battery strap and body clip. Plug the

battery pack into the ESC (fig. 3).

STEP 3

Fig 1

Fig 2

Fig 3

Remove the transmitter battery cover, install

four (4) AA batteries (Pay close attention to

the polarity of the positive (+) and negative (-)

ends) and replace cover.

Plug the charger into the proper wall

receptacle then the battery into the charger

and let it charge for 3 hours for the first time.

For subsequent charges allow 5 to 6 hours

for a full charge.

Getting Started

Fig 1

Fig 2

Fig 3