Hollywood Racks T900 Truck Rack - Manual

Hollywood T900 Truck Rack
Installation Instructions
● Easy to install – No holes to drill
● Features patented Grip Rite clamps to
securely attach the rack to the side rails of the truck bed.
● Fits both mini and full sized trucks.
● Includes quick release bike “fork mounts” for two bikes.
Parts List
Item Description Quantity
A Outer load bar 1
B telescoping inner
load bar
1
C Thumbscrew 1
D Grip Rite clamp 2
E Quick-release fork mounts 2
F Allen wrench 1
Installation Instructions
Attaching Grip Rite Clamps to truck bed.
Open poly bag containing Grip Rite clamps and Allen wrench. Using the Allen wrench, separate
the two clamp halves and affix the protective adhesive foam
strips as indicated.
RAILS “Rails” are the upper part of the truck bed side-wall that rolls over to either the inside or
the outside of the truck bed. All new and late model trucks have inner rails, while many of the
older Datsun/Nissan and Toyota trucks have outer rails.
Position Grip Rite clamps on the truck bed rail 6” to 12” behind the cab. Insert Allen bolt
through center hole and loosely assemble. Repeat for opposite side of truck. Clamps should be
approximately parallel to each other.