Hollywood Racks HR2500 Commuter User Manual
Commuter 2 bike hitch rack, Assembly and installation instructions, Hollywood racks
1
Commuter 2 Bike Hitch Rack
Assembly and Installation instructions
WARNING! THIS PRODUCT IS NOT TO BE USED ON ANY TRAILER
PLEASE FOLLOW THESE IMPORTANT POINTS:
DRIVE SLOWLY WHEN USING THE RACK ON BUMPY OR DIRT ROADS.
CHECK THE RACK, BIKES AND STRAPS REGULARLY DURING USE.
IF YOU HAVE ANY QUESTIONS OR INSTALLATION PROBLEMS, PLEASE SEE YOUR
RETAILER OR CONTACT US AT 800- 747- 4085
.
HOLLYWOOD RACKS
MODEL HR2500
Commuter Rack box contents:
1.
Main Assembly per Fig. 1
2.
Lower Beam per Fig. 2
3.
Receiver Tube per Fig. 3
4.
Hardware bag per fig. 4, including
4A: Threaded hitch pin bolt, washer,
lock-
washer and “R” clip
4B: ½”-20 bolt, nut & washers for
connection of lower beam to receiver
tube.
4C: Two 5/16”-18 carriage bolts, nuts &
washers for connection of upper beam
to lower beam.
4D: Allen key for receiver tube adapter
Assembly step 1:
Attach Lower
beam to
Upper beam
1. Insert the lower beam’s
side with 2 square holes
into the upper beam.
2. Align the holes.
3. Insert carriage bolts (C)
through holes.
4. Install washers and
nuts.
5. Tighten securely using a
wrench.
Tools required: two adjustable wrenches.