Eyepiece adjustmefvst – Canon Super 8 814 User Manual

Page 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

The white button is for checking the mercury bat

teries, and the red button is tor the penliKht

batteries. Set the three-way switch at "R”, press

a button and check the position of the needle

seen in the battery tester window If the needle

is in the blue zone, the batteries have sufficient

power level. Otherwise, replace the batteries

i>lf the needle points to th^ white zone,_the^

penlight batteries have power level for 12 and

18 fps only

EYEPIECE ADJUSTMEfVST

Loosen the eyepiece adjustment ring by turning

it to the left. Aim the camera in the direction

of a bright subject and then look into the view

finder. Turn the Rveniece and adjust it so that

the aperture scale and the lines of the prism

screen can be clearly seen. Then tighten the

[ eyepiece adjustment ring

12 and ISfps only