Nikon 35MM Film Scanner LS-10E - Manual (Page 78)

Specifications
1. Reading system/Optics
Film type
35 mm film (colour or monochrome, positive or
negative)
Reading resolution
2,592 X 3,888 pixels
Effective resolution
2,393 X 3,648 pixels (with strip film holder)
Reading area
24.3 X 36.5 mm
Effective area
22.5 X 34.3 mm (with strip film holder)
Light source
RGB 3-colour LED
Colour separation
3-filter selectable LED
Film holder
No holder needed for mounted slides, strip film
holder for strip slides
Imaging optics
Fligh-resolution optics (Autofocus, Manual focus)
Gradation
256 gradations each for R, G and В
2. Scanning/Signal processing
Image scanning (single pass)
Main scanning:
2,592-element CCD line sensor
Sub-scanning:
Moving film stage driven by step motor
Scanning time
Pre-scan:
Approx. 30 sec.
Actual scan:
depends on the kind of interface, resolution
setting and film density
(Approx. 140 sec. for 3-colour within a
1,000 X 1,000-pixel range with standard film)
Scanning density
2,700 dpi
Pixel size: 9.4
цт square
Pixel density: 106 pixels/mm on film
A/D conversion
8 bits
78