Service and maintenanc – Craftsman 247.887330 User Manual

Page 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SERVICE AND MAINTENANC

Installing the Timing Belt

8. Before installing a replacement timing belt, the marks on each

spindle assembly must be positioned in such a way as to ensure

the blades are perpendicular to each other, Figure 27.

Turn the spacer spindle assembly (E) so that the arrow

punched on the spindle is facing the front of the mower.

Figure 25.

Turn the drive spindle assembly (F) so that the arrow

punched on the spindle is facing to the outside of the cutting

deck. Figure 25.

Route the new belt around pulleys making sure to tighten nuts

and bolts. Install the spring removed in step 4.

Tighten screw and nut loosened earlier.

Replace the belt cover.