Replacing the deck engagement belt, Replacing the blade timing belt, Service and maintenance – Craftsman 247.887330 User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SERVICE AND MAINTENANCE

Replacing the Deck Engagement Belt

1. Stop engine, wait for all parts to stop moving, and disconnect

spark plug wire.

Release all mower controls.

Remove belt cover as Instructed earlier In this section.

Loosen the bolt and nut holding belt keeper rod to frame.

Figure 23.

Replacing the Blade Timing Belt

Stop engine, wait for all parts to stop moving, and disconnect

spark plug wire.

Release all mower controls.

Remove belt cover as Instructed earlier In this section.

Removing the Timing Belt

Remove spring (A) from timing bracket and deck. Figure 25.

Route new belt around the pulleys making sure to tighten nuts,

bolts, and belt keeper.

Replace the belt cover.

assemblies. Figure 25.