Sony DTC-57ES - Manual (Page 38)

Various Playback Operations
Random Music Sensor (RMS) Operation
CHECK
2
•RMS = Random Music Sensor
The RMS function allows you to program the
desired selections in the desired order.
For the operation, program numbers must be written
on the tape.
This operation can be performed oniy with the
remote commander.
1
Designate the desired seiection by pressing the
numeric button(s) during the stop mode.
The selection numbers can be specified from 1 to 99.
To stop RMS piay
Press ■.
To check the programmed seiections
Press the CHECK button on the remote commander. Each
time you press the CHECK button, the programmed
selections appear in the designated order.
To add a seiection to the program
Once the RMS play starts, you cannot add a selection. To
add a selection, first stop the RMS play, and program new
selection(s) by following the procedure described on the
left column.
To delete the selection you programmed last
Press the CLEAR button.
However, when checking the programmed selection, the
CLEAR button cannot be used.
To cancel the entire program
In the stop mode; Press the ■ button once.
In the RMS play mode: Press the ■ button twice.
Lights
2
Press the ENTER button.
5
Indicates the playing order. The RMS indicator lights
after programming the first
selection.
3
Repeat step 1 and 2.
A maximum of 60 selections can be programmed.
4
Press the ► (play) button.
The programmed selections are played back in the
designated order.
38