Sony CCD-FX510 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

How to Record

Checking the tape remaining

Press TAPE/BATT CHECK.

Tape length indicator

The tape length indicator which shows the tape remaining time appears in the viewfinder

(It may take about 20 seconds to display it.) When the time remaining is less than about 5

minutes, the indicator shows the time remaining in minutes.

■ ]E-

•►S[

•►SC

'Ш В -

■5mln

Omin

\ I /

•- Omln--^-

^ I Ч

4mln

When “5 min" lights, the indicator blinks in the viewfinder.

Note on the tape length indicator

• The camcorder must be in the recording or playback mode when the TAPE ВАТТ CHECK is

pressed to find out the time remaining. In the playback mode the indicator does not show the
tape remaining time in minutes.

• The tape length indicator does not change while using EDITSEARCH.

Basic Camera Operation