Installing the lithium battery – Sony CCD-FX510 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Installing the Lithium Battery
To store birth dates and a title in the camcorder's memory, as well as to activate the clock,
a lithium battery must be installed.
Note that the lithium battery has a + (plus) and a - (minus) side as illustrated below. Be
sure to install the lithium battery with the correct polarity.
Remove the lithium battery holder
at the bottom of the camcorder.
Install the supplied CR2025
lithium battery with the't- side
facing down.
+ side
side
Put the lithium battery holder into the camcorder.
Lithium battery life
The battery lasts for about 1 year in normal operation.
When the lithium battery becomes weak, the ^ indicator blinks in the viewfinder screen
for about 5 seconds when you set the POWER switch to CAMERA. In this case, replace
the battery with a Sony CR2025 or Duracell DL-2025. Use of any other battery may
present a risk of fire or explosion.
When replacing the lithium battery, keep the battery pack or other power source attached.
Othenwise. resetting of the date. time, and birth dates will be necessary.
Replacing the lithium battery
Remove the lithium battery holder from the camcorder, pull out the lithium battery and
insert a new one.
Warning Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire.
Cautions Keep the lithium battery out of the reach of children.
Should the battery be swallowed, consult a doctor immediately.
•j 2 Getting Started