Baseline Systems BaseManager 2.0 VM - Manual (Page 7)

BaseManager 2.0 VM Server Configuration Guide
Step 3 – Set Up the IP Information
1. Press any key until the Network Config Dialog displays. The Device configuration option is
highlighted.
2. Press ENTER to select Device configuration. The Select a Device screen displays with the
ethØ (ethØ) – Ethernet
line highlighted.
3. Press ENTER. The Network Configuration screen displays with the cursor in the Name field.
4. Leave the default entries in the Name and Device fields.
5. Perform one of the following in the Use DHCP field:
 If your network has a DHCP server that assigns IP addresses to connected devices, leave
the default entry [*] in the field. Press TAB to select the Ok button, and then press
ENTER. Continue to step 6.
3