Great Plains Auxiliary Hydraulic Kit - Manual (Page 6)

Great Plains Mfg., Inc.
6 Auxiliary Hydraulic Kit
401-466M 05/05/2009
Refer to Figure 12
34. Select four:
800-004C SNAP RING EXT BASIC 1.880
Starting with the left port:
35. Attach each hose assembly to the bulkhead
with a pair of snap rings . Each quick disconnect
coupler has two grooves. Align the coupler with
one groove/ring behind the bulkhead and the other
in front of it.
Refer to Figure 13, which is an isolated view of the bulkhead
36. Select two:
502-068D HYD HOSE CLAMP BRACKET
and four each:
802-009C RHSNB 5/16-18X1 1/4 GR5
804-009C WASHER LOCK SPRING 5/16 PLT
803-008C NUT HEX 5/16-18 PLT
37. Drop each round-head carriage bolt in one of
the four square holes in the top of the bulkhead .
38. Slide a clamp over the bolt threads and loosely
attach a lock washer and nut .
39. Leave a small amount of slack in the hose at the
couplings, and secure the clamps.
40. Select two (not shown):
841-207C DUST CAP
41. Secure the retainer leads of the caps to any conve-
nient point (such as the chain on the seed box lock
pins), and cap the Auxiliary ports.
Figure 12
Install Hoses at Bulkhead
25405
16 16
13
1
32
16
1 13
16
32
Figure 13
Bulkhead Hose Clamps
25406
23
21
18
13
U
D
B
F
R
L
15
15
18
23
21
18
13
15
23 21
35