Great Plains Auxiliary Hydraulic Kit - Manual (Page 10)

Great Plains Mfg., Inc.
10 Auxiliary Hydraulic Kit
401-466M 05/05/2009
Reconnect Marker Sequence Valve
Refer to Figure 20
57. Select two:
811-463C HH3/8R2 015 9/16FJIC 9/16FJIC
58. At the marker sequence valve connect a hose
to the bottom Front port . Tighten JIC fitting.
59. At the selector valve , connect the other end of
that hose to the bottom Front (marker) port .
Tighten ORB and JIC fittings.
60. At the marker sequence valve connect a hose
to the top Front port . Tighten JIC fitting.
61. At the selector valve , connect the other end of
that hose to the top Front (marker) port .
Tighten ORB and JIC fittings.
Tie-Wrap Hoses
62. Select the set of:
800-060C CABLE TIE .19X14.25 3DIA 50LB
63. Inspect the area at the selector/sequence valves,
and tie any hoses that appear at risk of chaffing or
getting caught in moving parts during folding/
unfolding and planting.
64. Fold the planter. This ensures correct hose length
at the wing pivot point.
65. Use the remaining ties to secure the new hoses
( or ) along the seed hose bundle and rack.
Figure 20
Re-Connect Sequencer
25412
U
D
F
B
L
R
1
33
28
3
2
6
7
33
1
33 2
28
33 6
1
33 3
28
33 7
17
31 34