Bay Technical Associates DS74 - Manual (Page 6)

DS74 Serial I/O Module
6
Unit Configuration Menu
The configuration menu allows the user to choose which unit they would like to access. Enter the number
that corresponds with the Host Module followed by a . Now the module can be configured as shown.
This menu is where you will be able to edit any of the information listed below. The following pages define
each line of the configuration menu.
NOTE: The DS74 I/O peripheral configuration is save to the host module.
DS74 Configuration Menu
IMPORTANT: Once you make a change to any of the Configuration options, you have to back out
of
the Configuration menu and will be asked to ‘Accept changes’. If you type ‘Y’ for YES, the
changes take effect immediately for the serial port.
Accept changes ? (Y/N) :y
Changes accepted.
Copyright(C) Bay Technical Associates 2005
Data Switch Series - EIA-232 I/O Module
Module 2
Status..........................1
Serial Port Configuration.......2
Port Device Name................3
Port Device Type................4
Exit............................X,CR
Enter Request :
Configuration
DS62 module #1..........1
DS74 module #2..........2
DS-RPC module #5..........3
Enter Request :