Return authorization process – Bay Technical Associates DS74 User Manual

Page 15

DS74 Serial I/O Module

Return Authorization Process:

1. Contact BayTech to get a Return Authorization (RA) Number. IMPORTANT: BayTech will not

accept any returns without an RA number.

2. Package the unit carefully in its original packaging or similar packaging. The warranty does not cover

damage sustained during shipment. Enclose a letter with name, address, RA number, daytime phone
number and description of the problem.

3. Mark the RA number clearly on the outside of the package.

NOTE: If the RA number is not on the outside of the box, the package will be returned back to the
sender or will sit in Receiving until the customer calls in regarding status of RA.

4. Ship the unit by insured, prepaid carrier to the following address:

Bay Technical Associates
5239 A Avenue
Long Beach Industrial Park
Long Beach, MS 39560
RA #: 140-xxxxx

5. Surround your unit with a minimum of two inches of insulation.

6. Be sure to seal the box securely with strapping or packing tape. We do not recommend masking tape

or cellophane tape.