Bay Technical Associates DS74 - Manual (Page 10)

DS74 Serial I/O Module
10
Select 5), to get the Parity, Default is None the Host module responds:
Type a number to select the Parity option and press .
RTS/DTR Line Driver Inactivity State
RTS (Request to Send)/ DTR (Data Terminal Ready) is normally used in conjunction with an external
modem. With no modem the RTS and DTS default state is High.
Select 6), from the Serial Port Configuration the Host Module responds:
Select 7), from the Serial Port Configuration the Host Module responds:
Type ‘Y’ for YES or ‘N’ for NO and press .
NOTE: Once you make a change to the Serial Port Configuration options, you have to back out of
the menu and will be asked to Accept changes. If you type ‘y’ for yes, the changes take effect
immediately for the serial port.
Type ‘Y’ for YES or ‘N’ for NO and press .
Port Device Name
Select the port you want to rename, followed by a . Type the name you want to identify the port.
The unit displays the current port configuration.
Accept changes ? (Y/N) :y
Enter Serial Port Number (? = Help, ENTER = Exit) :1
Changes accepted.
DTR Line Driver Inactive State is: High
High ? (Y/N, CR for no change):
RTS Line Driver Inactive State is: High
High ? (Y/N, CR for no change):
Select parity:
1 For None
2 For Even
3 For Odd
Enter Request :