Lexicon MPX 1 - Manual (Page 98)

Lexicon
7-24
MPX 1 User Guide
The Echo effects are similar to
the Delay effects, except the feed-
back inputs are sent through 1-
pole low-pass filters.
Damp provides control over the
cutoff frequency of the filter. (In-
creasing Damp lowers cutoff fre-
quency.)
Echo (M)
Echo (S)
Echo (D)
* = Interpolated; ( ) = Option of preceding parameter
Echo (M), Echo (S) and Echo (D)
Mix 0-100% Dry/Wet ratio
Level Off, -89 to +6dB Amount of effect in the processed signal
Time 0-2000ms Delay time in mono version
1:24-24:1echo/beat,
0-2260 ft, 0-688 M
(Time Units) Selects ms, note, feet, meters, or Tap ms
Time1 0-1000ms Left delay time
1:24-24:1echo/beat,
0-1130 ft, 0-344 M
(Time1 Units) Selects ms, note, feet, meters, or Tap ms
Time2 0-1000ms, Right delay time
1:24-24:1echo/beat
0-1130 ft, 0-344 M
(Time2 Units) Selects ms, note, feet, meters, or Tap ms
Lvl 1* Off, -95 to 0dB In Echo (D) controls left delay output level
Lvl 2* Off, -95 to 0dB In Echo (D) controls right delay output level
Fbk 1 -100 to +100% Left feedback level
(Fbk insert) Pitch, Chorus, EQ, The outputs of the selected source are scaled by Fbk
Mod, Reverb, Delay
Fbk 2 -100 to +100% Right feedback level
Damp1 0 to +100% Cutoff frequency of low-pass filter in left feedback path
Damp2 0 to +100% Cutoff frequency of low-pass filter in right feedback path
Guitar Solo Tape Echo