Wood’s Powr-Grip PT410AC User Manual

Page 7

Rev 11.3/2-13

PT410AC: #35140

Note: Some hoisting equipment hooks could interfere with an upright load that extends
beyond the lifter's pad frame. If the load would contact the hook during lifter operation, the

operator must prevent this by attaching a sling (or other rigging that does not interfere with
the load) between the hook and the lift spool.

WARNING: Any sling used must be rated to carry maximum load weight plus

lifter weight.

Note: The lifter is equipped with a movable control pendant, which can be placed in two

locations on the lifter or moved away from the lifter, to allow for different operator positions.

Position the control pendant on either the lift bar or the pad frame, depending on which
location is more convenient for the expected application of the lifter (see OPERATING
FEATURES).
Use the hoisting equipment to raise the lifter out of the shipping container. Be careful to

avoid damaging any vacuum pads. Remove the pad covers and save them for use whenever
the lifter is stored. Now the lifter is operational.

4) Perform Operational and Load Tests for the lifter as directed in MAINTENANCE: T

ESTING

CHEDULE