Initial setting, Online manual not for resale purposes – BLITZ R-VIT i-Color User Manual

Page 9

Initial Setting

②Setting of displayed language

ENG = English

JPN = Japanese

Compatible only with vehicles equipped with this function. See “Vehicle

Compatibility Chart”. Select “Mileage Coeffic” and set it between “0～2500” based

on the chart.

③Setting of Fuel Mileage Co efficiency

Select “Car Type” and choose the maker of the installed vehicle. The R-VIT I-Color

was a function to automatically search the transmission system used by the vehicle

manufacturer. To utilize this function, choose “AUTO” and the R-VIT will select the

“Car Type”. However, depending on the vehicle, there is a possibility that this function

may not work.

Select “Auto Power ON”, and choose CAN if the installed vehicle falls on a) from the

previous page (Installation Method). For others choose ACC.

Select “COMM Wait” to configure the transmission system from the vehicle. The

communication time is displayed as [0] the fastest ～ [3] the slowest.

①Setting of communication system.

Set the IGN to ON, start up the R-VIT i-Color and select

“Funct” at the Icon Menu. Then Reset if needed. (Will set

the setting to factory default)

Online Manual Not For Resale Purposes