Online manual not for resale purposes – BLITZ R-VIT i-Color User Manual

Page 19

②Fuel Injection Trace

It displays the fuel injection control trace and a dual digital meter. The setting taken place at the “Fuel Injection”
from “Function” will take effect. Moreover, it is also possible to change the settings from here and it will also take
effect at the “Fuel Injection” from “Function”.
Press the RIGHT switch to cancel and return to the previous screen.
Press the LEFT switch to shift from night and day illumination and vice versa.
Press the UP switch to shift from Fuel Injection Trace / A/F Graph / Meter Screen / Dual Digital Meter / Six Fold /
Meter/ Fuel Injection Trace. Press the UP switch for over 3 seconds and it will scroll back wards.
Press the DOWN switch to turn ON or OFF the Injection Control function. (The Injection Control function is
activated if a

＊

in yellow is seen)

Press the ENCODER and it will switch to the “Target RPM Control Mode”. Turn the ENCODER to select the target
RPM to control the fuel injection then press the ENCODER again to switch to the “Fuel Injection Variable Control
Mode”. Turn the ENCODER to configure within ±25%.
The operation will be cancelled if any operation in not taken for over 10 seconds.
Press the ENCODER for over 3 seconds and it will switch to “Dual Digital Meter Display Source Item 1 Selection
Mode”. Turn the ENCODER to select the item and press the ENCODER to confirm. It will automatically switch
to “Item 2 Selection” (The operation is the same as “Item 2 Selection”) Press the RIGHT switch to return to the
previous display after confirmation. The item sources able to display for 1 and 2 are the same as explained in
“MODE Explanation 3 (DIGITAL)”

The Scale is

Fixed at ±25%.

Fixed RPM

Scale

Dual Digital

Meter Display

Items

Trace Cursor

(In yellow)

①Reset

1) Will clear all the Peak Values.
2) Will clear all the graph data.
3) Will reset all to factory values besides the contrast.

②Demonstration Function

Turn the power ON while pressing the UP switch. To deactivate the demo function, turn the power on
while pressing the DOWN switch.

Online Manual Not For Resale Purposes