AiM GSX-R 1000 - Manual (Page 23)

MXL P&P SUZUKI GSX-R K3
User Manual
Release 1.07
www.aim-sportline.com
It is now necessary to configure the display.
Select System configuration layer:
This window appears:
The following fields have already been set:
RPM: RPM Max value is set on 14000;
Gear sensor: the procedure explained in chapter 6 is required;
Shift light: an engine limiter at 11000 Rpm is expected. If the engine has a limiter with an
higher max value, users need to modify threshold values inserted in the shift lights cases,
so that the last red led switches on just before the limiter intervention.
Speed: the speed sensor of Suzuki GSX-R K3 bike is installed on the jackshaft that
connects the gearbox to the pinion. The number of magnets installed on this jackshaft is 4.
The wheel circumference written in the proper cell is an “equivalent circumference”
calculated using the following formula:
c
p
N
N Circumf Wheel
Circumf Equiv
*
=
Np = pinion teeth number
Nc = crown teeth number
Using the default values for crown/pinion teeth number and wheel circumference for a
Suzuki GSX-R K3 750, the equivalent circumference is 801.4 (31.55inches).
If the pinion or the crown are changed and the new one has a different teeth number,
equivalent circumference needs to be re-computed.
For the automatic compute of the wheel circumference, please refer to
“Equivalent
circumference compute” paragraph.
23