AiM GSX-R 1000 - Manual (Page 16)

MXL P&P SUZUKI GSX-R K3
User Manual
Release 1.07
www.aim-sportline.com
1 7
2.7 – Installing the kit
The 7
th
installation step is connecting the
26 pins MS connector to MXL. Once
installed the connector, place the black
aluminium box between the bracket and
the high beam.
When the channels interface box has
been placed (using Velcro or plastic
wrappers), install the kit on the high
beam.
Figure 27 : 4 screws position.
The new dash needs to be fixed in four
points: two of them frontally visible and
two lateral.
Use the M5 screws supplied with the kit
to fix the new dash in the two frontal
points and the Phillips thread forming
screws to fix it laterally.
Figure 28 : position of lateral and bottom wings of the
bracket.
Use the thread forming screws supplied
with the kit to fix the new dash laterally
(Figure 29). The screws have to be
inserted in the hole circled in Figure 29.
Note: the front fairing has already
been pulled onwards like in Figure 13.
It is possible to use plastic wrappers to
fix the new wiring to the chassis.
Figure 29 : lateral screws fixing
Before remounting lateral fairing, front screen, bike seat and fuel tank, switch the bike on
and check system integrity, its correct installation and proper working.
16