BT Freestyle 1025 User Manual

Page 32

NOTE

Your additional handset must be placed on the base

unit within 5 seconds of the

IN USE light flashing.

NOTE

Your Freestyle additional handset is pre-set

to handset number 2.

NOTE

Make a note of the identification number by writing

it on the handset’s directory label.

NOTE

Check that your additional handset is registered

correctly by pressing the

TALK button and listening

for a dial tone. If you do not hear a dial tone your

additional handset is either out of range of the base

unit or it has not been registered properly, or the base

unit line cord is not plugged in.

To re-register an additional handset

Before re-registering, the old
registration code must first be erased.
If necessary you can re-register your
additional handset by simply following
the above procedures.

To set a handset identity number

Press the

QUICKDIAL

button.

Press the

SECRECY

button.

KEYPAD

Enter the identification number

(2-4)

using the keypad.

When you have entered the number,
press the

QUICKDIAL

button.

You will hear a beep confirming that
the new number has been stored.

To set the handset number

Each additional handset must be
assigned an identity number (2, 3 or 4).
Your Freestyle 1025 handset is already
numbered as HANDSET 1. Additional
handsets can then be numbered as they
are added.

Quickdial

Secrecy

ADDITIONAL HANDSET