BT Freestyle 1025 - Manual (Page 17)

13
To insert a pause
With some switchboards, after dialling
the access code you may have to wait
for a moment while the switchboard
picks up an outside line. If so, press
the
REDIAL button to insert a 2.5 second
pause before keying in the telephone
number.
Redial
To use the recall button
This button signals either time break
recall or earth recall depending on the
setting of the dialling mode. If you are
connected to a PBX (Private Branch
Exchange), contact your PBX supplier
for further information.
R
To set the dialling mode
USING Y
OUR PHONE
To switch from pulse to tone dialling
If you are connected to a pulse dialling
exchange, you can still use services
such as phone banking that require
tone dialling.
KEYPAD
Call the telephone number you require
in pulse mode as usual.
When you have been connected, press
the
✱ button on the keypad to set
your telephone to tone dialling for the
duration of the call.
When you hang up, your Freestyle 1025
will automatically switch back to pulse
dialling.
To page the handset
If you misplace the handset, you can
use
PAGE to find it again.
Press the PAGE button on the base.
The handset will beep. The IN USE light
on the base flashes.
Stop the handset beeping by pressing
the
PAGE button again
or
the
TALK button on the handset. (Please
note: pressing the TALK button will cut
off the line, you will then need to put the
handset back onto the base unit.)
Page
Page
Press the QUICKDIAL button during
standby mode.
Press the ✱ button.
Press 1 for Tone dialling.
Press 2 for Pulse dialling.
Press the QUICKDIAL button to finish
the setting (you will hear a confirmation
tone). If no instruction is received
during this process within 8 seconds,
there will be a beep and the process
will be cancelled before returning to
standby mode.
1
2
ABC
Play
Quickdial
Quickdial