Fuse replacement – Broan E54000 User Manual

Page 5

- 5 -

FUSE REPLACEMENT

IF LIGHTS FAIL TO OPERATE,
DISCONNECT THE POWER AT THE
SERVICE ENTRANCE. CHECK THE FUSE
AND REPLACE IF NECESSARY.

1. Remove the grease filters.

2. Remove the cover of the fuse box.

3. Locate the fuse holder. Unscrew its cap

and remove the fuse.

4. Replace the fuse with the same size and

amperage (5x20mm, 4amp, 125volt).

Do not use fuses greater than 4 amps.
Fuses greater than 4 amps may

damage the transformer.

5. Reinstall the fuse holder cap, fuse box

cover and grease filters.

6. Reconnect power at the service entrance.

FUSE

FUSE BOX

FIG. 3