Halogen bulbs, Fuse replacement – Broan RMPE User Manual

Page 8

Text mode
Original mode

- 8 -

HALOGEN BULBS

This range hood requires two halogen bulbs
(Type T4, 12V, 20W).
ALWAYS SWITCH OFF THE ELECTRICITY
SUPPLY BEFORE CARRYING OUT ANY
OPERATIONS ON THE APPLIANCE.

To change bulbs:

1. Open the cover by prying from the proper

slots. - DO NOT ROTATE. CAUTION: BULB
MAY BE HOT!

3. Replace with a Type T4, 12V, 20W bulb. Do

not touch replacement bulb with bare
hands! If the bulb is touched with the bare
hand, it should be cleaned with a lint-free
cloth moistened with rubbing alcohol.

FUSE REPLACEMENT

SWITCH OFF THE ELECTRICITY SUPPLY.

Remove the grease filters.

Open the fuse box.

Replace with the same type of fuse (5x20mm,
4A, 125V).

FUSE BOX

FUSE