Pioneer AVIC-F250 - Manual (Page 15)

Black plate (15,1)
Checking part names and
functions
3 4 2 1
1 SD card slot
p An SD memory card containing map
data is inserted at the factory.
p Do not erase the map data stored on the
SD memory card (inserted at the factory).
Without the data, the navigation function
is disabled.
2 Video output selector switch
The switch is used to change the resolution
of video output to the AV receiver.
! When the switch is set to the left,
WQVGA video is output.
! When the switch is set to the right,
WVGA video is output.
3 Reset button
= For details, refer to Resetting the micro-
processor on the next page.
4 Power indicator
Inserting an SD memory card
p The included SD memory card must be in-
serted into the SD card slot for prior to
using the AVIC-F130 or AVIC-F250 for the
first time.
1 Insert an SD memory card into the SD
card slot.
2 Gently press the card in against the
spring latch until it stops, then release.
The card will lock firmly into place inside the
SD card slot.
<127075024473>15
Engb
15
Chapter
02
Intr
oduction
Introduction