Brother HL-2060 - Manual (Page 155)

USER’S GUIDE
4–80
DUPLEX MODE
If the optional duplex printing unit has been installed, the duplex mode
appears on the display as follows:
DUPLEX MODE
1. Press the SET switch to enter the duplex mode menu.
Then the display shows the current selection for the duplex printing or
simplex printing (duplex off) with an asterisk as follows:
DUPLEX=OFF *
2. Press the ▲ or ▼ switch to select the duplex or simplex (duplex off),
and press the SET switch.
When you set “DUPLEX=ON”, the display shows the current bind
setting with an asterisk as follows:
BIND=LONG *
3. Press the ▲ or ▼ switch to select long edge binding or short edge
binding.
BIND=LONG BIND=SHORT
Fig. 4-9 Binding
4. Press the SET switch to exit the DUPLEX MODE.
The printer exits from the setting mode to the off-line state.
5. Press the SET switch again to exit the FEEDER switch setting mode to
the printer off-line state.