Brother HL-2060 - Manual (Page 111)

USER’S GUIDE
4–36
PAGE PROTECTION
✒ Note
The setting in this mode menu is effective in the HP LaserJet, EPSON
FX-850, IBM Proprinter XL, and HP-GL modes. It does not appear in the
BR-Script 2 mode.
If print images are too complex to print, the printer may print them out in
parts or only on part of the page. If this occurs, the printer loses print data
and shows the following message:
31 PRINT OVERRUN
The page protection function reserves additional memory so that the
printer can create the entire page image in memory before physically
printing it out. This function can be set for letter, A4, or legal size paper.
Select the paper size for page protection.
Display Message Page Protection
PROTECT=AUTO Page protection on only when it is
necessary. (Factory setting)
PROTECT=LETTER Page protection on for letter size paper.
PROTECT=A4 Page protection on for A4 size paper.
PROTECT=LEGAL Page protection on for legal size paper.
PROTECT=OFF Page protection off
To protect pages, you need the memory capacity as shown in the following
table:
Protection 300 dpi 600 dpi
Off standard standard
Letter or A4 standard standard
Legal standard standard
(Duplex) standard 10 Mbytes