Barco Nio Fusion 4MP - Manual (Page 32)

Display information
32
Switching Power LED on/off
To switch the power LED on/off:
1. Touch any of the soft touch keys.
The front illumination is switched on.
2. While the illumination is on, touch the Enter touch key to
display the main menu.
3. Use the Up or Down touch keys to select the Settings
menu. Use Enter to open the menu.
4. Use Up or Down to select Power LED. Use Enter to go
into edit mode.
5. Use Up or Down to select On or Off.
6. Use Enter to save the changes.
Note:
• When the display is switched in stand-by, the power LED will
turn orange, even if the power LED setting is switched off.
• When the power LED setting is switched off, the LED will still
turn on (green) when the display is on but receives no video
signal.
Enabling/disabling User Controls
To disable the user controls:
1. Open the OSD main menu.
2. Open the Settings menu.
3. Select User Controls.
4. Select Off.
5. Return to the Settings menu.