Konica Minolta MSP3500 - Manual (Page 45)

3. Control Panel Keys and Indicators
2-13
Scann
er
Ch
ap
te
r 2
When (Misfeed/Call-Tech.-Rep. Code) Lights up
This indicates that a paper misfeed or malfunction has occurred in the system. Check the code
shown on the Multi-Print Display and perform the misfeed clearing procedure or the Call-
Tech.-Rep. procedure.
Malfunctions Procedure
* Only MSP3500 displays the code.
Code Description
The power to the printer is OFF or there is a problem with the
connection of the interface cable to the printer. Turn ON the
printer or make sure that the interface cable is securely con-
nected.
The upper cover of the printer is not closed.
Make sure that it is completely closed.
*
It is defective of the toner cartridge. Or, the toner cartridge is
not installed.
Install a correct toner cartridge.
*
The toner cartridge of a different type is set.
Install a correct toner cartridge.
*
You are using an end-of-lifed (completely used) toner car-
tridge(s).
When Start Key is pushed again, it prints. (When Clear/Stop
Key is pushed, the print is canceled.)
To ensure the best print quality, you are strongly recommend-
ed to replace immediately.
The printer is out of paper. Load some paper into the paper cas-
sette.
☞
See p. 3-6, p. 4-6.
*
Paper of the output bin was filled.
Remove the paper from the output bin.