Kramer Electronics EDID Designer - Manual (Page 24)

22 EDID Designer - Editing an EDID
5.2.4 Simplified
– HDMI Audio
HDMI Audio screen is shown if a CEA extension block exists and one of its
descriptors is AUDIO.

If any of a particularly defined audio configuration (see advanced- ext’-audio)
exists, check the block

If none exists, uncheck the block

If not checked, this sets all the matching
“short-audio-blocks” to a “place-
holder ” setting – pcm/192kHz/24-bit. This is considered a vacant block. The
user can now check other settings and apply them to the
“vacant” short-
block

If checked, the corresponding
“vacant” block receives the matching set
corresponding to place in the table

The number of blocks you can check is restricted to the number of vacant
“short-audio-blocks”. To add additional short blocks, do it in the advanced
mode.