APC Switched Rack Power Distribution Unit (PDU) - Manual (Page 63)

® ® ® ®
USER
’S GUIDE
switched rack pdu
59
Links (Web interface)
Use this option to modify the links to APC Web pages.
.
Reset to Defaults Resets all configuration settings. This option will reset the
TCP/IP settings and enable DHCP and BOOTP.
Reset to Defaults Except
TCP/IP Resets all configuration settings except the TCP/IP
settings.
Reset Only TCP/IP to
Defaults Resets the TCP/IP settings only. This option will not enable
DHCP and BOOTP.
XMODEM (serial
connection only) Allows you to download firmware using a terminal-
emulation program when you use a local connection to the
control console. To connect to the control console locally,
see
Local access to the control console .
Action Definition
Setting Definition
User Links
Name
Defines the link names that appear in the Links menu (by default,
APC’s Web Site, Testdrive Demo, and Remote Monitoring).
URL
Defines the URL addresses used by the links. By default, the
following URL addresses are used:
• http://www.apc.com (APC’s Web Site)
• http://testdrive.apc.com (Testdrive Demo)
• http://rms.apc.com (Remote Monitoring)
Note: Only links of type http:// can be used in these fields.
For information about these pages see Links menu .
Access Links
APC Home Page
Defines the URL address used by the APC logo at the top of all Web
interface pages (by default, http://www.apc.com).