Goulds Pumps 3409 - IOM - Manual (Page 2)

Pump Safety Tips
Safety Apparel:
l Insulated work gloves when handling hot bearings or
using bearing heater
l Heavy work gloves when handling parts with sharp
edges, especially impellers
l Safety glasses (with side shields) for eye protection,
especially in machine shop areas
l Steel-toed shoes for foot protection when handling parts,
heavy tools, etc.
l Other personal protective equipment to protect against
hazardous/toxic fluids
Coupling Guards:
l Never operate a pump without a coupling guard properly
installed
Flanged Connections:
l Never force piping to make a connection with a pump
l Use only fasteners of the proper size and material
l Ensure there are no missing fasteners
l Beware of corroded or loose fasteners
Operation:
l Do not operate below minimum rated flow, or with
suction/discharge valves closed
l Do not open vent or drain valves, or remove plugs while
system is pressurized
Maintenance Safety:
l Always lock out power
l Ensure pump is isolated from system and pressure is
relieved before disassembling pump, removing plugs, or
disconnecting piping
l Use proper lifting and supporting equipment to prevent
serious injury
l Observe proper decontamination procedures
l Know and follow company safety regulations
Observe all cautions and warnings highlighted in pump
Installation, Operation and Maintenance Instructions.