Myron L 6P and 4P - Manual (Page 34)

30
to all measurement modes using User solution selection (i.e. TDS/User,
Cond/User or Res/User).
XVI. uDock™ IR DATA PORT INSTRUCTIONS
Requires Myron L uDock™ accessory package, Model # U2CIP.
The Myron L uDock is powered via the USB port, requiring no external
power source. The uDock application will operate on Windows 2000 &
XP*, and Macintosh OS9.2 & OSX** based computer systems.
A. Software Installation
1. Place Myron L Ultrameter II uDock Installation CD into your
computer.
2. Upon opening, select the folder for your operating system.
3. Install uDock application. See detailed installation instructions
on CD.
4. Additional drivers may be required. See our website for the
latest information.
B. Hardware Setup
1. Connect USB cable (provided with uDock) to your computer.
Assuming your computer is on, the uDock GREEN LED will
illuminate indicating there is power to the uDock and that a
proper connection has been made.
C. Memory Stack Download
1. Launch the application using the uDock icon.
2. Select the proper comm port setting (first time only).
3. Place CLEAN, DRY Ultrameter II on uDock.
4. Press key.
5. Press and HOLD
key until the menu “PC
OFF” appears, (see
Figure 30).
Figure 30