AGFA DC-630 - Manual (Page 46)

- 45 -
Software Installation
System Requirements
Windows:
PC with processor better than MMX Pentium 233 MHz
Windows XP/2000/ME/98SE/98
Minimum 32 MB RAM
USB port
CD-ROM drive
800x600 pixels, 16-bit color display compatible monitor
Macintosh:
Power Mac G3 or later
Mac OS 9.0, 9.1, 9.2 and OS X
Minimum 64 MB RAM
USB port
CD-ROM drive
800x600 pixels, 16-bit color display compatible monitor
*Specifications are subject to change without prior notice.
NOTE:
You don’t have to turn off the computer or camera when making this connection.
Refer to your computer’s manual for information regarding the USB port location.
The camera will turn off automatically if the USB cable is disconnected.
Windows 98/98SE: If this is the first time the camera has been connected to the
computer, Windows detects the camera as an “Unknown device” and automatically
completes the required software installation.