AGFA DC-630 - Manual (Page 14)

- 13 -
Inserting a Memory Card
You can use SD Card or MMC Card with this digital camera. The memory card slot is located
beneath the battery cover, adjacent to the battery compartment.
1. Be sure that the camera is turned off.
2. Slide the battery cover and open it.
3. Insert the card with the label facing up and
the arrow pointing in.
4. Close the battery cover.
To remove the memory card, gently press on the
edge of the card and release it. Pull the card
out and close the battery cover.
About Camera Memory
The digital camera is equipped with internal memory. If the memory card is not inserted in
the camera, all images and movie clips recorded by the camera will be stored in the internal
memory. If the memory card is inserted, images and movie clips are stored on the memory
card.
DCF Protocol
The DCF protocol defines the format for image file data as well as the directory structure for
the memory card. Images that are taken by a DCF camera can be viewed on DCF-compatible
cameras from other manufacturers.