AGFA DC-630 - Manual (Page 44)

- 43 -
Resetting to Default Settings
You can reset the entire menu and button operation settings to initial default.
1. Set the camera to the Setup Menu
2. Press or to select RESET ALL ( ) then press or the SET button to launch
the submenu.
3. Press or to select YES then press the SET button to reset all settings.
Making Connections
Connecting the Camera to a TV
Images displayed on the camera’s monitor screen can also be displayed on a television.
1. Use the included audio/video cable to connect
the camera to the TV set.
2. Set the TV input signal to Video In. Refer to
the documentation included with your TV for
more information.
3. Everything that would normally appear on the
camera’s LCD screen, such as photo and video
clip playback, slide shows, and image or video
capture, appears on the TV.
NOTE:
The camera LCD screen turns off automatically during video output.
NOTE:
The following settings do not change with this procedure:
Date & Time setting
Language setting
TV out setting