IPricot IPR-S1000 - Manual (Page 8)

Installing the IPR-S1000
3
Ensure your safety
Each electrical device must be handled with care, so please
follow these instructions:
1) Before working on equipment connected to an electrical power
supply, please remove any bracelet, necklace or watch. Such metal
items may actually heat up so badly from an accidental electrocution
that they may cause severe burns, or they may weld onto other metal
parts and/or equipment.
2) Keep your working spot clean and clear during the complete
installation process.
3) Move out any tool that may be in your way.
4) Wear safety glasses to operate in an environment that is
potentially dangerous for your eyes.
5) Avoid putting people around you at risk: act with caution and do not
alter the product or its instructions in such a way that it may become
dangerous.
6) Previously locate the circuit breaker in your work room in order to
be able to quickly shut the power, would an electrical problem occur.
7) Do not work alone when there is a risk of electrocution or short-
circuit.
Should an accident occur, it is mandatory to follow these
basic rules:
1) Do not put yourself in danger: shut off electrical power.
2) In case of accident, evaluate any victim’s condition to the best of
your knowledge and send someone else to seek help.
3) Try to determine if the victim needs breathing assistance or a heart
massage, and act accordingly.