IPricot IPR-S1000 - Manual (Page 46)

Configuring the IPR-S1000
41
In the blank field, enter the frequency (in GHz).
In the blank field, enter the baud rate (in kilo bauds).
In the drop-down menu, select the baud rate locking method.
In the drop-down menu, select the FEC value.
In the drop-down menu, select the polarization.
In the drop-down menu, select the modulation.
Interface
In the blank fields, enter the MPE PIDs.
In the blank field, enter the primary DVB IP address.
In the blank field, enter the DVB interface MTU.
In the drop-down menu, select yes to activate processing CRC MPE.
In the drop-down menu, select the LLC SNAP traffic.
In the drop-down menu, select the number of filtering bytes.