IPricot IPR-S1000 User Manual

Page 31

Configuring the IPR-S1000

1) With the «+» or «-» key, enter the new password.
2) Confirm the selection by pressing the «down» arrow.

16. Chg. read pwd

This screen allows you to enter a new password for the read level.

1) With the «+» or «-» key, enter the new password.
2) Confirm the selection by pressing the «down» arrow.

17. Update firmware

This screen allows you to download a new firmware from a TFTP
server.

To start the download process, press the «down» arrow. To cancel it,
press the «up» arrow.

18. Backup firmware

This screen allows you to save the current firmware to a TFTP server.

To start the upload process, press the «down» arrow. To cancel it,
press the «up» arrow.

19. Auto update

This screen allows you to enter the reception code in order to activate
the reception process. These five decimal numbers shall be provided
by the satellite operator in charge of the update.

To confirm the password and proceed with the updating, press the

New write password:

* * * * * * * *

New read password:

* * * * * * * *

TFTP Server addr.:
192.168.001.004

Receipt code:
224.005.004.003.4321