IPricot IPR-S1000 - Manual (Page 38)

Configuring the IPR-S1000
33
LNB power shows if the IPR-S1000 is supplying power to the LNB.
Frequency corresponds to the reception frequency of the DVB carrier (floating
point number in giga hertz).
Baud rate is the number of symbols transmitted per second. In QPSK
modulation, 1 symbol = 2 bits. It is a floating point number bounded by 2000 to
45000 Kbauds values.
FEC: Forward Error Correction. It is a technique for improving the robustness of
data transmission.
Polarization is a technique used by the satellite designer to increase the
capacity of the satellite transmission channels by reusing the satellite
transponder frequencies.
Modulation corresponds to the alteration of a carrier wave in relation to the value
of the data being transferred.
Active MPE PIDs: Multi Protocol Encapsulation Packet Identifier. It corresponds
to the segmentation of the packets’ stream.
MAC address: Media Access Control. On a Local Area Network (LAN) or other
network, the MAC address is your computer’s unique harware number. (On an
Ethernet LAN, it is the same as your Ethernet address.)
IP address (DVB): Internet protocol. It is a unique network number included in
any packet sent out of the network onto the Internet.