beautypg.com

Sony PCV-R536DS User Manual

Page 59

background image

S5 - Quicken

®

Basic 99(Finance)

S6 - Help

All six buttons are reprogrammable.

Applications That Use the TWAIN Driver

Digital imaging applications, such as Adobe PhotoDeluxe,

®

allow you to transfer images to your

computer from external devices, including scanners or digital cameras. For some devices, a TWAIN
driver window appears on the screen. Always close the TWAIN driver window before exiting or
minimizing a digital imaging application.

Memory Upgrade Specifications

When upgrading memory, use only 3.3V 64-bit PC-100 168 PIN SDRAM DIMM modules. Sony
computer supplies, accessories, and peripherals can be purchased from your dealer or by
contacting Sony at

http://www.sony.com/accessories

.

Restoring Outlook 98

For the Add New Components functionality to be available with Microsoft Outlook, you must first
run the installation program for Outlook from the Application Recovery CD. When prompted to
install the program, select Exit. This decompresses the software, making the Add New Components
functionality available.

Using DVgate Motion

When capturing clips:

Do not use DVgate Motion when the connected digital video peripheral is in Timer Recording mode,
as this could produce a malfunction in the peripheral.

Captures larger than 2 GB (9 minutes and 30 seconds) are automatically continued in a second
file.

You can record stereo audio (stereo 1) while capturing video. You cannot add audio on the stereo
2 track after capturing the video data.

You cannot use different audio modes on the same tape. You should perform a separate capture
for each audio mode you wish to use.

DVgate Motion does not support hard disk compression. You should not use disk compression if
you are planning to work with DVgate Motion.

Title data is saved in the flash memory of a digital video camera and is not transferred to tape by
DVgate Motion.

To avoid interruption of capture sessions, you should disable the screen saver.

The drop frame compensation feature does not provide accurate compensation adjustments for
tapes recorded in LP mode.

For tapes that include a mixture of both SP and LP mode, the information displayed by the capture
progress indicator may not be accurate.

Make sure the video head of your digital video device is properly cleaned. Anomalies that you see
in captured data could be due to dust or other particles on the video head.

o

The last frame captured is one frame before your selected [OUT] point. The frame you see
immediately after clicking the [OUT] button is not captured.

When recording AVI files to tape:

Do not use DVgate Motion when the connected digital video peripheral is in Timer Recording mode,

Page 59