Agilent Technologies Agilent 4396B - Manual (Page 50)

Step 4: Saving and Recalling Analyzer Settings
Y ou can store the settings or measurement data on a 3.5 inch disk
using the analyzer's disk drive . In this tour , you save and recall the
settings that you selected previously in this tour .
Preparing the Disk T o use a disk, you must rst initialize it by performing the following
steps:
V erify the disk is not write protected. Insert the disk into the disk drive
Press 4 Save 5 . Press
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FILE UTILITIES .
T oggle
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FORMAT [DOS] to
FFFFFFFFFFFFFF
[LIF] and
F FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
STOR DEV [MEMORY] to
F FFFFFFFFFFFFFFF
[DISK] .
Press
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
INTIALIZE DISK .
2-12 Spectrum Analyzer T our