Agilent Technologies Agilent 4396B - Manual (Page 43)

Setting the Analyzer Type
T o use the spectrum analyzer mode , you must set the analyzer type to
the spectrum analyzer mode after selecting an active channel.
In the MEASUREMENT block, press 4 Meas 5 . Press
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
ANALYZER TYPE .
Press
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
SPECTRUM ANALYZER .
Note Changing the analyzer type presets the analyzer for the active
channel. If you want to keep the current measurement settings when
changing the analyzer type , rst set the other channel to active .
Spectrum Analyzer T our 2-5