AT&T 9452 - Manual (Page 6)

INSTALLATION
4
Before You Install
1 Choose a location for the base near an electrical outlet and a
telephone jack.
This phone requires a modular telephone jack and a standard electrical
outlet (110v AC) not controlled by a wall switch. For optimum
performance, install the base on the highest floor of your home.
b) Place the battery
pack in the
handset. Align the
metal contacts on
the battery with
the contacts in the
battery
compartment.
c) Replace cover by
sliding it on its track
up over battery case
until it snaps firmly
into place.
a) Remove battery
compartment
cover by pressing
on the indentation
and sliding
downward.
9452_book_1ATT 10/5/00 3:17 PM Page 4